|
|
|
WLAN Cams Get Tilt/Pan |
|
|
|
Written by Adam Gosling
|
|
Monday, 24 July 2006 |
NetComm has added remote tilt and pan control to its MyLANCam
IP video camera range with the launch of the NS380W.
Priced at $499 per unit, the new NS380W allows users to
control the viewing angle of the camera significantly increasing its coverage capabilities.
The unit is able to pan from -170 degrees to +170 degrees while the tilt
function works from -90 degrees to +45 degrees.
The increase of coverage translates to lower cost of
deployment as less cameras are required to provide coverage of a given area.
The unit has a focal range of around 20 metres and has the
ability to program regular sweeping patterns and various angles.
"With the growing popularity of broadband for home and small
businesses, digital surveillance over the Internet is now a real possibility
for everyone," said David Stewart, Managing Director, NetComm. "Prior to
products like the MyLANCam range, the only choice was an expensive to install
Closed Circuit TV system that does not allow viewing from a remote location." 
"The NS380W delivers an affordable security solution that
can be monitored from anywhere in the world, with the versatility of pan and
tilt functions so that a single camera can cover a much wider area."
The device words by capturing live video images and then
making these available over a wireless Local Area Network (LAN) or the Internet
for remote monitoring.
A built-in Web server allows users to access the camera
remotely (through a web browser). This would allow a user who installed a unit
at home to check on the state of their house from their computer at work.
The MyLANCam range comes bundled with software to manage up
to 16 cameras on the one network and provides users with control of the viewing
angle of the camera.
A configurable motion detection facility is also included,
which can be set up to capture still images for archiving, or if the camera is
triggered, users can be emailed an alert directly.
Related news items Newer news items
Older news items |
|
|